Many machines claim they are multi-process but are little more than MIG units in disguise. Not Rebel. These are true multi-process welders, which means whether you are welding MIG, Flux-Cored, Stick – even those tricky 6010 electrodes – or TIG, these welders perform like they were born to run that process.
THE REBELLION KEEPS GROWING.
Whether you choose the portable-single phase EMP 215ic or a three-phase industrial unit like the EMP 320ic, you will be amazed by the arc stability and reliability - guaranteeing you the highest performance. There are three truths to every Rebel - outperforming the competition, standing up to whatever comes your way in the shop or out in the field and making your job easier.
Rebel 215ic
Wire Feeder Specifications
Rebel™ EMP 215ic
Mild Steel : 0.6-1.0 mm
Stainless Steel : 0.8-1.0 mm
Aluminium : 0.8-1.2 mm
Flux Cored : 0.8-1.2 mm
Rebel™ EM 215ic
Mild Steel : 0.6-1.0 mm
Stainless Steel : 0.8-1.0 mm
Aluminium : 0.8-1.2 mm
Flux Cored : 0.8-1.2 mm
Max Output (A)
Rebel™ EMP 215ic
240 A
Rebel™ EM 215ic
240 A
Welding Output
A @ Duty Cycle
Rebel™ EMP 215ic
MIG (GMAW) 130 A @ 20 %
MIG (GMAW) 205 A @ 25 %
MMA (SMAW) 90 A @ 40 %
MMA (SMAW) 180 A @ 25 %
TIG (GTAW) 130 A @ 40 %
TIG (GTAW) 180 A @ 30 %
Rebel™ EM 215ic
MIG (GMAW) 205 A @ 25 %
MIG (GMAW) 130 A @ 20 %
Rebel 235ic
Wire Feeder Specifications
Rebel™ EMP 235ic
Mild Steel : 0.6-1.0 mm
Stainless Steel : 0.8-1.0 mm
Aluminium : 0.8-1.2 mm
Flux Cored : 0.8-1.2 mm
Max Output (A)
Rebel™ EMP 235ic
250 A
Welding Output
A @ Duty Cycle
Rebel™ EMP 235ic
MIG (GMAW/FCAW) 230 A @ 25 %
MIG (GMAW/FCAW) 195 A @ 40 %
MIG (GMAW/FCAW) 170 A @ 60 %
MMA (SMAW) 210 A @ 25 %
MMA (SMAW) 150 A @ 60 %
TIG (GTAW) 235 A @ 40 %
TIG (GTAW) 200 A @ 60 %
Rebel 255ic
Wire Feeder Specifications
Rebel™ EMP 255ic
Mild Steel : 0.8-1.2 mm
Stainless Steel : 0.8-1.2 mm
Flux Cored : 0.8-1.2 mm
Aluminium : 1.0-1.2 mm
Max Output (A)
Rebel™ EMP 255ic
300 A
Welding Output
A @ Duty Cycle
Rebel™ EMP 255ic
MIG (GMAW) 255 A @ 40 %
MIG (GMAW) 200 A @ 60 %
MIG (GMAW) 160 A @ 100 %
MMA (SMAW) 255 A @ 40 %
MMA (SMAW) 170 A @ 60 %
MMA (SMAW) 130 A @ 100 %
TIG (GTAW) 255 A @ 40 %
TIG (GTAW) 215 A @ 60 %
TIG (GTAW) 170 A @ 100 %
Rebel 320ic
Wire Feeder Specifications
Rebel™ EMP 320ic
Mild Steel : 0.8-1.4 mm
Stainless Steel : 0.8-1.4 mm
Flux Cored : 0.8-1.6 mm
Aluminium : 1.0-1.2 mm
Max Output (A)
Rebel™ EMP 320ic
350 A
Welding Output
A @ Duty Cycle
Rebel™ EMP 320ic
MIG (GMAW) 320 A @ 40 %
MIG (GMAW) 265 A @ 60 %
MIG (GMAW) 200 A @ 100 %
MMA (SMAW) 300 A @ 40 %
MMA (SMAW) 255 A @ 60 %
MMA (SMAW) 180 A @ 100 %
TIG (GTAW) 320 A @ 40 %
TIG (GTAW) 265 A @ 60 %
TIG (GTAW) 200 A @ 100 %
The true multi-process industrial machines you have to see to believe.
TRUTH:
Unmatched toughness
You are on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
TRUTH:
NEXT-LEVEL TECHNOLOGY
Whether you have been welding for two years or 20, Rebel’s exclusive sMIG (smartMIG) technology is sure to impress. For the novice, there is basic mode, which makes setup a breeze. For the professional, (the builtin dynamic arc control constantly monitors your weld and adapts to your technique, providing a smooth, stable arc and superior, repeatable welds.
x
Contact Us Form
Register your information on the form below and we'll let you know when the new Rebels are available in your area.
TRUTH:
High Performance