This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Previous Next

TIG Rods (GTAW)

ALL_PRODUCTS_MODE

ESAB
OK Tigrod 1070
OK Tigrod 1070
OK Tigrod 1070 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and it is used extensively in thin-gauge and foil products. It has good welding characteristics. ... [Read more]
ESAB
OK Tigrod 1100
OK Tigrod 1100 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and it is used extensively in thin-gauge and foil products. It has good welding characteristics. ... [Read more]

ESAB
OK Tigrod 12.60
OK Tigrod 12.60
OK Tigrod 12.60 is a copper-coated Mn-Si-alloyed W2Si/ER70S-3 solid rod for the GTAW of non-alloyed steels, as used in general construction, pressure vessel fabrication and shipbuilding.
[Read more]
ESAB
OK Tigrod 12.61
OK Tigrod 12.61
OK Tigrod 12.61 is a copper-coated Mn-Si-alloyed W3Si1/ER70S-6 solid rod for the GTAW of non-alloyed steels, as used in general construction, pressure vessel fabrication and shipbuilding.
[Read more]

ESAB
OK Tigrod 12.64
OK Tigrod 12.64
OK Tigrod 12.64 is a copper-coated Mn-Si-alloyed W4Si1/ER70S-6 solid rod for the GTAW of non-alloyed steels, as used in general construction, pressure vessel fabrication and shipbuilding. It has a slightly higher manga ... [Read more]
ESAB
OK Tigrod 13.08
OK Tigrod 13.08
OK Tigrod 13.08 is a 1.5Mn-0.4Mo-alloyed (ER80S-D2), copper-coated rod for the GTAW of creep-resistant steels of the same type, such as pipes in pressure vessels and boilers with a working temperature of up to about 500°C. ... [Read more]

ESAB
OK Tigrod 13.09
OK Tigrod 13.09
OK Tigrod 13.09 is a 0.5Mo-alloyed, copper-coated rod for the GTAW of creep-resistant steels of the same type, such as pipes in pressure vessels and boilers with a working temperature of up to about 500°C.
[Read more]
ESAB
OK Tigrod 13.12
OK Tigrod 13.12
OK Tigrod 13.12 is a 1.0Cr-0.5Mo-alloyed, copper-coated rod for the GTAW of creep-resistant steels of the same type, such as pipes in pressure vessels and boilers. The rod can also be used for welding low-alloyed, high ... [Read more]

ESAB
OK Tigrod 13.16
OK Tigrod 13.16
OK Tigrod 13.16 is a 1.3Cr-0.5Mo-alloyed (ER80S-B2), copper-coated rod for the GTAW of creep-resistant steels like SA-387 Grade 11, A 335 Grade P11 or similar materials. The rod has a high purity chemistry with a guara ... [Read more]
ESAB
OK Tigrod 13.17
OK Tigrod 13.17
OK Tigrod 13.17 is a 2.5Cr-1.1Mo-alloyed (ER90S-B3), copper-coated rod for the GMAW of creep-resistant steels like SA-387 Grade 22, A335 Grade P22 or similar materials. The rod has a high purity chemistry with a guaran ... [Read more]

ESAB
OK Tigrod 13.22
OK Tigrod 13.22
OK Tigrod 13.22 is a 2.5Cr-1.0Mo-alloyed, copper-coated rod for the GTAW of creep-resistant steels such as pipes in pressure vessels and boilers of similar composition, with service temperatures of up to 600°C, but it ... [Read more]
ESAB
OK Tigrod 13.23
OK Tigrod 13.23
OK Tigrod 13.23 is a 0.9Ni-alloyed (ER80S-Ni1), copper-coated rod for the GTAW of low-temperature, fine-grained steels. The wire provides good impact toughness down to -50°C and is especially suitable for use in the of ... [Read more]

ESAB
OK Tigrod 13.26
OK Tigrod 13.26
A copper coated, low alloyed, nickel copper (0,8% Ni, 0,3 %Cu) rod for the GTAW of weathering steels such as COR-TEN, Patinax, Dillicor etc. The weld metal composition and mechanical properties also make this product s ... [Read more]
ESAB
OK Tigrod 13.28
OK Tigrod 13.28
OK Tigrod 13.28 is 2.4Ni-alloyed (ER80S-Ni2), copper-coated rod for the GTAW of low-temperature, fine-grained steels in applications such as pressure vessels, pipes and the offshore industry, with a minimum yield stren ... [Read more]

ESAB
OK Tigrod 13.37
OK Tigrod 13.37
OK Tigrod 13.37 is a 9Cr-1Mo-alloyed, copper-coated rod for the GTAW of high temperature steels and steels for hot hydrogen service, especially in oil refineries. The electrode is a plain ER505 type.
[Read more]
ESAB
OK Tigrod 13.38
OK Tigrod 13.38
OK Tigrod 13.38 is a non-copper coated, low alloyed, 9CrMoVN rod for the GTAW of high-temperature steels and steels for hot hydrogen service, especially in oil refineries. It should preferably be used for 9% Cr steels, ... [Read more]

ESAB
OK Tigrod 19.12
OK Tigrod 19.12
Bare copper welding rod alloyed with small amounts of tin for welding of oxygen free, pure copper and low alloyed copper. The weld is easily workable. For welding of large work pieces and heavy thickness preheating is recommended.
[Read more]
ESAB
OK Tigrod 19.30
OK Tigrod 19.30
Bare copper wire for the GTAW joining of copper-zinc alloys and low-alloyed copper alloys. OK Tigrod 19.30 is alloyed with silicon and manganese and has good flow properties and wear resistance. The alloy is widely used ... [Read more]

ESAB
OK Tigrod 19.49
OK Tigrod 19.49
Bare Cu-Ni rods for welding similar alloys, such as 90Cu10Ni, 80Cu20Ni and 70Cu30Ni alloys. The addition of nickel strengthens the weld metal and improves corrosion resistance, particularly to salt water. The alloy is ... [Read more]
ESAB
OK Tigrod 2209
OK Tigrod 2209
Bare, corrosion-resistant, duplex welding rods for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% Mo types. OK Tigrod 2209 has high general corrosion resistance. In media containing chloride and ... [Read more]

ESAB
OK Tigrod 2307
OK Tigrod 2307
A continous, solid, corrosion-resistent duplex wire for welding austenitic-ferritic stainless alloys of the 21% Cr-1% Ni or 23% Cr-4% Ni type. Lean duplex types are used for civil engineering, storage tanks, containers, etc. ... [Read more]
ESAB
OK Tigrod 2509
OK Tigrod 2509
Bare, corrosion-resistant, “Super Duplex’’ rods for welding austenitic-ferritic stainless alloys of the 25% Cr, 7% Ni, 4% Mo, low C types. OK Autrod 2509 has high intergranular-corrosion, pitting and stress-corrosion resistance. ... [Read more]

ESAB
OK Tigrod 308H
OK Tigrod 308H
Bare, corrosion-resistant, chromium-nickel rods for welding austenic chromium-nickel alloys of the18% Cr-8% Ni type. OK Tigrod 308H has good general corrosion resistance. The alloy has a high carbon content, which makes ... [Read more]
ESAB
OK Tigrod 308L
OK Tigrod 308L
OK Tigrod 308L has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. The alloy is widely used in t ... [Read more]

ESAB
OK Tigrod 308LSi
OK Tigrod 308LSi
Bare, corrosion-resistant, chromium-nickel rods for welding austenitic chromium-nickel alloys of the18% Cr-8% Ni type. OK Tigrod 308LSi has good general corrosion resistance. The alloy has a low carbon content which ma ... [Read more]
ESAB
OK Tigrod 309L
OK Tigrod 309L
Bare corrosion resisting chromium-nickel welding rod for welding of similar steels of 24% Cr, 13% Ni types. The alloy is also used for welding of buffer layers on CMn steels and welding of dissimilar joints. When using ... [Read more]

ESAB
OK Tigrod 309LSi
OK Tigrod 309LSi
Bare, corrosion-resistant, chromium-nickel welding rod for welding steels with similar composition, wrought and cast steels of the 23% Cr-12% Ni types. The alloy is also used for welding buffer layers on CMn steels and ... [Read more]
ESAB
OK Tigrod 309MoL
OK Tigrod 309MoL
Bare, corrosion-resistant rod of “309LMo’’ type. OK Tigrod 309MoL is used for the overlay welding of unalloyed and low-alloyed steels and for welding dissimilar steels such as 316L to unalloyed and low-alloyed steels w ... [Read more]

ESAB
OK Tigrod 310
OK Tigrod 310
Bare, corrosion-resistant, chromium-nickel welding rod for welding heat-resistant austenitic steels of the 25Cr-20Ni type. The wire has a high Cr content and provides good oxidation resistance at high temperatures. Com ... [Read more]
ESAB
OK Tigrod 312
OK Tigrod 312
Bare, corrosion-resistant, chromium-nickel welding rods for welding materials of the 29% Cr, 9% Ni types. OK Tigrod 312 has good oxidation resistance at high temperatures due to its high content of Cr. The alloy is wid ... [Read more]

ESAB
OK Tigrod 316L
OK Tigrod 316L
Bare corrosion resisting chromium-nickel-molybdenium welding rods for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo-types. OK Tigrod 316L has a good general corrosion resistance, ... [Read more]
ESAB
OK Tigrod 316LSi
OK Tigrod 316LSi
Bare, corrosion-resistant, chromium-nickel-molybdenum rods for welding austenitic stainless alloys of the 18% Cr-8% Ni and 18% Cr-10% Ni-3% Mo types. OK Tigrod 316LSi has good general corrosion resistance, particularly ... [Read more]

ESAB
OK Tigrod 318Si
OK Tigrod 318Si
Bare, corrosion-resistant, stabilised, chromium-nickel-molybdenum wire for welding Cr-Ni-Mo and Cr-Ni stabilised or non-stabilised steels. OK Tigrod 318Si has good general corrosion resistance. The alloy is stabilised ... [Read more]
ESAB
OK Tigrod 347
OK Tigrod 347
Bare, corrosion-resistant, chromium-nickel rods for welding stabilised austenitic chromium-nickel alloys of the 18% Cr-8% Ni type. The rods are stabilised with niobium, which provides good resistance to the intergranul ... [Read more]

ESAB
OK Tigrod 347Si
OK Tigrod 347Si
Bare, corrosion-resistant, chromium-nickel rods for welding austenitic chromium nickel alloys of the 18% Cr-8% Ni type. OK Tigrod 347Si has good general corrosion resistance. The alloy is stabilised with niobium to imp ... [Read more]
ESAB
OK Tigrod 385
OK Tigrod 385
Bare, corrosion-resistant welding rods for welding austenitic stainless steels of the 20Cr-25Ni-4.5Mo-1.5Cu type. The weld metal has good resistance to stress corrosion and intergranular corrosion and shows very good r ... [Read more]

ESAB
OK Tigrod 410NiMo
OK Tigrod 410NiMo
Bare welding rods of the 420NiMo type alloyed with 13% Cr, 4.5% Ni and 0.5% Mo. This alloy is used for welding similar composition martensitic and martensitic-ferritic steels in different applications, such as hydroturbines.
[Read more]
ESAB
OK Tigrod 5087
OK Tigrod 5087
Bare welding rod suitable for welding aluminium alloys with up to 5% Mg and alloys where a higher tensile strength is required. The alloying element Zr produces improved resistance to hot cracking during solidification.
[Read more]

ESAB
OK Tigrod 5554
OK Tigrod 5554
OK Tigrod 5554 is a solid aluminium rod with a content of 2.7% Mg. It is recommended for the welding of AlMg alloys like 5454. Typical applications include chemical storage tanks, automotive components like wheels and ... [Read more]
ESAB
OK Tigrod 5556A
OK Tigrod 5556A
Bare welding rod suitable for welding aluminium alloys with up to approx. 5% Mg that are not age hardenable and alloys where a higher tensile strength is required. The corrosion resistance in a marine atmosphere is very good.
[Read more]

ESAB
OK Tigrod NiCr-3
OK Tigrod NiCr-3
Bare corrosion and heat-resisting Ni-Cr-Mo rods for welding of high alloyed heat-resisting and corrosion resisting materials, 9%Ni-steels and similar steels with high notch toughness at low temperatures. Also for joi ... [Read more]
ESAB
OK Tigrod NiCrMo-4
OK Tigrod NiCrMo-4 is a corrosion and heat resistant, nickel-chromium rod for TIG welding of high alloyed steel, heat resistant steel, corrosion resistant steel, 9Ni steels and similar steels with high notch toughness ... [Read more]

ESAB
OK Tigrod NiCu-7
Bare nickel based welding rods alloyed with 30% Cu for welding of base materials of the same type. Can also be used to join these alloys to steel. The weld metal has good resistance to flowing seawater and has high str ... [Read more]
×
x
x

x

Loading..