Repair and Maintenance

OK 13Mn is an austenitic manganese steel electrode which work hardens under impact and compressive stresses. It is primarily used for surfacing and building up manganese steel components exposed to severe impact and mo ... [Read more]

Austenitic stainless-steel electrode producing a weld metal with less than 5% ferrite. The tough weld metal has excellent crack resistance, even when welding steels with very poor weldability. Suitable for joining 12-14% ... [Read more]

OK 68.81 is a high-alloyed electrode which deposits a ferritic-austenitic duplex weld metal with approx. 40% ferrite. It is resistant to stress corrosion and is highly insensitive to dilution. Good scaling resistance up ... [Read more]

OK 68.82 is a high-alloyed electrode which deposits a ferritic-austenitic duplex weld metal with approx. 30-35% ferrite. It is resistant to stress corrosion and is highly insensitive to dilution. Good scaling resistance ... [Read more]

Electrode for welding copper and bronzes, especially tin bronzes. It is also suitable for cladding steels and for small-scale repair work in weldable cast irons. For the repair and construction of parts in casting s ... [Read more]

Copper-nickel electrode used for chemical process equipment, desalination plants and offshore applications. It is suitable for the joining and cladding of matching and dissimilar alloys.
[Read more]

Covered electrode suitable for welding of Mn-alloyed aluminium and aluminium alloys containing up to 3 % Mg, e.g. EN AW-3103, 3207, 3003, 5005.
[Read more]

Covered electrode suitable for welding of aluminium castings of AlSi-, AlSiMg- and AlSiCu-types. Also possible to use as filler material in gas welding.
[Read more]

Covered electrode suitable for welding of AlMgSi-alloys e.g. EN AW 6060/6063, 6005, 6201 etc. Also suitable for welding of AlSi5Cu- and AlSi7Mg-castings.
[Read more]

OK Ni-CI is a nickel cored electrode for joining normal grades of cast iron, such as grey-, ductile- and malleable irons. It is also suitable for rectification and repair of these grades and for joining them to steel. ... [Read more]

OK NiCu 1 is a nickel-copper electrode of the monel-alloy type for welding all types of cast iron with or without low preheat. The weld metal is easily machinable and produces a colour very similar to that of cast iron.
[Read more]

A nickel-iron electrode for welding normal grades of cast iron and for joining them to steel. Can be used for malleable nodular cast iron and alloy cast iron. It has a special iron jacketed Ni core wire, which gives the ... [Read more]

A nickel-iron cored electrode for joining normal grades of cast iron, such as grey-, ductile- and malleable irons. It is also suitable for rectification and repair of these grades and for joining them to steel. Deposi ... [Read more]

Electrode for surfacing hot working tools. Suitable for service temperatures up to about 550°C and applications where toughness and good wear resistance are required. Typical applications include hot working blades and shears, ... [Read more]

Hardfacing electrode of the high-speed steel for repair welding of cutting tools, drills, stamping machines etc. The weld metal obtains its maximum hardness by double tempering. Suitable for step welding. To avoid issu ... [Read more]

A cored wire which produces a martensitic 12%-chromium alloy steel deposit with nitrogen addition. It is used under flux in the submerged arc process.
[Read more]

OK Tubrodur 13Cr G is a versatile, metal-cored, hardfacing wire which deposits a martensitic 13Cr alloy steel deposit, especially suitable for applications involving wear at elevated temperatures. They include shafts, ... [Read more]

OK Tubrodur 13Cr S is a cored wire which produces a 13%-chromium alloy steel deposit used with OK Flux 10.37 or OK Flux 10.61.
[Read more]

OK Tubrodur 13Mn O/G is a self-shielded, flux-cored wire of the austentic-manganese type. The work hardening characteristics and extremely tough crack-resistant weld metal ensure that OK Tubrodur 13Mn O/G is the ideal ... [Read more]

OK Tubrodur 15.65 is a flux-cored wire for self- or CO2 shielding, depositing a martensitic-austenitic, work-hardening deposit. OK Tubrodur 15.65 can be used for the rebuilding of mild, low-alloy and 13Mn steels. The w ... [Read more]

A stainless, 18.8.6Mn, self-shielded, tubular wire for cladding and joining 13% Mn steels and steels with limitied weldability. It is also useful for buffer layers prior to hardfacing.
[Read more]

OK Tubrodur 30 O M is a self-shielded, flux-cored wire for semi-automatic hardfacing, producing a chromium-manganese-alloyed weld metal with a hardness of 28-36 HRC. It is ideal for the on-site rebuilding of rollers, shafts, ... [Read more]

OK Tubrodur 35 G M is a CO2-shielded, flux-cored wire for the hardfacing deposit of a manganese-chromium-molybdenum-alloyed weld metal. It is used for the surfacing of wheel runners, wheels and rollers for conveyor belts, ... [Read more]

OK Tubrodur 35 O M is a self-shielded, flux-cored, tubular wire, primarily developed for the on-site rebuilding of worn CMn railway and tram tracks. The weld deposit is of the CrNiMo type and has excellent compressive ... [Read more]

OK Tubrodur 15.42 is a self- or CO2-shielded, flux-cored wire for GMAW hardfacing. It is designed for surfacing wheel runners, track links, billet rolls, wheels and rollers for conveyor belts, wheels for mine trucks, r ... [Read more]

A tubular hardfacing wire for rebuilding and surfacing using the submerged arc welding process.
[Read more]

OK Tubrodur 55 O A is a self-shielded, Cr-carbide type flux-cored wire. The weld metal is extremely resistant to abrasive wear by gritty fine grain materials such as earth, ore, clay, etc. Typical applications are the ... [Read more]

OK Tubrodur 58 O/G M is a self- or CO2-shielded, flux-cored wire for hardfacing with a hardness of 55-60 HRC. It is designed for hardfacing feed screws, mixer blades and vessels and ring grooves on diesel-engine pistons.
[Read more]

OK Tubrodur 58 S M is a flux cored wire for SAW hardfacing in conjuction with OK Flux 10.71. OK Tubrodur 58 S M is designed for hardfacing of feed screws, mixer blades and vessels, ring grooves on diesel motor pistons.
[Read more]

OK Tubrodur 60 G M deposits a weld metal with a structure consisting of evenly divided, hard chromium carbides in a martensitic matrix, with a hardness of HV 600-700. It is suitable for hardfacing parts subjected to ex ... [Read more]

OK Weartrode 30 is a chromium-alloyed electrode for hardfacing and cladding tracks, shafts, rolls, rails and rail-crossing sections, as well as components in rolling mills, such as grooved rollers and clutches and large ... [Read more]

General purpose hardfacing electrode for repair welding worn parts on agricultural equipment, forestry tools, loading machines, etc. Transformers with low low open circuit voltage can be used (>45 volt).
[Read more]

A general purpose hardfacing electrode depositing a semi corrosion resistant martensitic steel with a hardness of about 57 HRC. The electrode is specially suitable for hardfacing parts exposed to different forms of abr ... [Read more]

Electrode producing a weld metal with coarse chromium carbides in an austenitic matrix. Suitable for surfacing worn parts exposed to abrasion and wear by coal, ore or other minerals. Typical applications include earth- ... [Read more]

A hardfacing electrode depositing a weld metal with a high volume fraction of fine carbides in a martensitic matrix. It is designed for protection of parts subjected to severe abrasion from rock, sand, cement, etc. Applications: earth ... [Read more]

The electrode deposits a high density of wear resisting carbides in an austenitic matrix capable of resisting extreme conditions of abrasion up to 700°C. Recovery approximately 220%. Typical applications include exhaust fans, ... [Read more]

Tungsten carbide particles in Stoody 130 weld deposits deliver serious wear resistance.
[Read more]

Stoody 140 wire consists of tungsten carbide particles in a nickel chrome boron matrix. This microstructure gives Stoody 140 superior toughness, corrosion and excellent fine particle erosion resistance in slurry type applications.
[Read more]

Stoody 155FC wire consists of tungsten carbide particles in a nickel silicon boron matrix. Designed for multiple pass operations where cross checking is undesirable. Stoody 155FC deposits are ideal when thicker nickel, silicon, ... [Read more]

Stoody 160 wire consists of tungsten carbide particles in a nickel silicon boron matrix. This microstructure gives Stoody 160 superior toughness, corrosion and excellent fine particle erosion resistance in slurry type applications.
[Read more]

Stoody 160-E coated electrode consists of tungsten carbide particles in a nickel silicon boron matrix. This microstructure gives Stoody 160-E sufficient toughness, extreme abrasion resistance, and excellent fine partic ... [Read more]

Stoody 160FC wire deposit consists of tungsten carbide particles in a nickel silicon boron matrix. Due to higher tungsten carbide content, Stoody 160FC is an ideal hardfacing overlay with a microstructure that delivers ... [Read more]

Stoodys torch grade spray powders are specifically designed for enhanced wetting characteristics in hand-held torch applications. These hardfacing powers cover a broad range of wear resistance needs.
[Read more]

Stoodys torch grade spray powders are specifically designed for enhanced wetting characteristics in hand-held torch applications. These hardfacing powers cover a broad range of wear resistance needs.
[Read more]

Stoody AC-DC Borod coated electrode is used for metal-to-earth applications requiring extreme abrasion resistance and low impact resistance. It is similar to Stoody AC-DC Tube Borium in all respects except that the mesh ... [Read more]

Stoody AC-DC Tube Borium coated electrode is manufactured by metering crushed tungsten carbide particles of controlled mesh size into steel tubes. It receives a thin graphitic coating.
[Read more]

Bare Acetylene Tube Borium is an oxy-fuel rod intended for metal-to-earth applications involving extreme abrasion and low impact. It is manufactured by metering crushed tungsten carbide particles of controlled mesh size ... [Read more]

Stoody Bare Borod hardfacing rod is used for metalto-earth applications requiring extreme abrasion resistance and low impact resistance. It is similar to Stoody Bare Acetylene Tube Borium in all respects except that the ... [Read more]

Stoody Horseshoe Borium was developed to provide a maximum non-slipping surface when applied to horseshoes. It is manufactured by metering relatively large tungsten carbide particles into steel.
[Read more]

Stoody Tube Borium H Rod is a bare rod manufactured by metering special mesh sizes of tungsten carbide particles into thin tubes.
[Read more]