This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Previous Next


OK Tigrod 308LSi

OK Tigrod 308LSi

Bare, corrosion-resistant, chromium-nickel rods for welding austenitic chromium-nickel alloys of the18% Cr-8% Ni type. OK Tigrod 308LSi has good general corrosion resistance. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The higher silicon content improves the welding properties such as wetting. The alloy is widely used in the chemical and food-processing industries, as well as for pipes, tubes and boilers.

Add to shopping list


Typical Tensile Properties

As welded
Elongation Tensile Strength Yield Strength
37 % 625 MPa 480 MPa

Charpy V-Notch Properties

As welded
Impact Value Testing Temperature
170 J 20 °C
150 J -60 °C
140 J -110 °C
75 J -196 °C

Weld Metal Analysis

MnMoCuCSiFerrite FNNiCr
1.8 %0.15 %0.10 %0.01 %0.9 %9 %10.5 %19.9 %

Approvals: BV; 308L BT; CE; EN 13479; DB; 43.039.11; DNV; 308L M; NAKS/HAKC; 2.0MM-3.2MM; VdTÜV; 05335
Classifications: EN ISO 14343-A; W 19 9 L Si; Wire Electrode; SFA/AWS A5.9; ER308LSi; Wire Electrode; Werkstoffnummer; ~1.4316; Wire Electrode

Approvals are based on factory location. Please contact ESAB for more information.

Alloy Type: Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C